Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 488)

100

101

USER’S GUIDE

488 CyberSWITCH

[AUTH] Warning code: 0010 Received unexpected authentication response code from server

A message was received from an authentication server that contained an invalid response message

identifier.

[AUTH] Warning code: 0011 An unexpected server responded to the access request

An access response message was received from an authentication server that is not configured in

the System.

[AUTH] Warning code: 0012 UDP call back processed with no data present

A message was received from an authentication server that contained zero data bytes.

Bad auth result in smgrauth_aa_notify for device <device name>

There was no device configured (on-node or in CSM) for the login id entered at the user-level

security prompt in the terminal server interactive window. Check configuration.

Bad context on SccDatInd <context value>

Indicates a problem has occurred in forwarding frames from the hardware to the frame relay

software. The intended context for this frame is specified by the indicated context value. Contact

your Distributor or Customer Support.

Bad context on X25SccDatInd <context value>

A data packet has been received with an incorrect context. This indicates that the system allocation

of SCC controllers is not in a consistent state. Restart the system.

Bad FR Frame Size = <frame size>

Indicates that a frame was received with an invalid length size. Contact your Distributor or

Customer Support.

Baud Rate is <value> bps

The Autobaud procedure has terminated and the RS232 port has been set to the specified baud rate.

[BIF] Could not allocate memory for buffer queue

[BIF] Initialization failed

These messages appear together in the report log. They indicate that an error occurred during

initialization of the Bridge Local Interface (which is required for IP Host mode). If these messages

are present in the log, the system will not operate correctly. Please contact your Distributor or

Customer Support.

Booting System Software

The Second Stage Boot is attempting to load and execute the System software.

Bootstrap came alive on DM card in slot <slot #>

Informational message stating that the initialization of the Digital Modem card was successful.

Bootstrap came alive on WAN card in slot <slot #>

Informational message during a successful system initialization. Download process update for

WAN card in slot <slot #>. This should be reported after the “Bootstrap loaded...waiting for

response” message for a given adapter.

Bootstrap loaded on WAN card in slot <slot #>, waiting for response...

Informational message during a successful system initialization. The first of three messages

providing the download process status for WAN card in slot <slot #>.

1 2 ... 483 484 485 486 487 488 489 490 491 492 493 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 488

Commentaires sur ces manuels