Enterasys Networks CSX7000 Manuel d'utilisateur Page 159

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 729
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 158
Central Site Remote Access Switch 159
C
ONFIGURING
B
ASIC
IP R
OUTING
Routing Information Protocol (RIP) Option
USING MANAGE MODE COMMANDS
iprip
This command tells you if IP RIP is currently enabled or disabled.
iprip off
If IP RIP is enabled, this command allows you to disable IP RIP.
iprip on
If IP RIP is disabled, this command allows you to enable IP RIP.
IP RIP CONFIGURATION ELEMENTS
IP RIP STATUS
The status IP RIP may be enabled or disabled.
IP RIP BACKGROUND INFORMATION
IP RIP is a protocol used to exchange routing information among IP devices. Using IP RIP can
automate the maintenance of routing tables on IP devices and you of manually keeping the routing
tables up-to-date. IP RIP determines the shortest path between two points on a network in terms of
the number of hops between those points.
If routing is enabled, and IP RIP is enabled, there will be default IP RIP information configured
under for LAN type interfaces and WAN interfaces. This configuration information is defined in
the section titled Network Interface Configuration Elements.
Notes: WAN connection information is propagated on LAN connections. Currently, IP RIP is
supported over:
•LAN
WAN (Remote LAN)
•numbered WAN
RIP is supported over WAN (RLAN) and numbered WAN links regardless of type of telco
access (dedicated, semi-permanent dial-up, or normal dial-up). Typically, however, it is
enabled over usage-sensitive WAN links, such as dedicated or semi-permanent dial-up.
For a more detailed explanation, refer to IP RIP and the IP Network Interfaces.
Vue de la page 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 728 729

Commentaires sur ces manuels

Pas de commentaire