Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 266)

100

101

USER’S GUIDE

266 CyberSWITCH

9. Enable Bridging.

10. Enable Make Calls for bridge data. You must have already configured the device’s phone number

(Step 6) before the system allows you to enable this feature.

Return to the Current Device Table. The system notifies you of proper configuration for your new

device, or informs you of what you are missing.

SPANNING TREE PROTOCOL

CONFIGURING SPANNING TREE PROTOCOL

USING CFGEDIT

Note: Although the Spanning Tree Protocol is supported for Ethernet-2 adapters only; the

Spanning Tree bridge address table aging time can be set for any Ethernet adapter.

1. Select Spanning Tree from the Bridging menu.

2. If your CyberSWITCH has an Ethernet-1 adapter, enter the bridge age time. If your

CyberSWITCH has an Ethernet-2 adapter, continue with step 3.

3. To configure the Spanning Tree elements, make sure Spanning Tree Protocol is enabled. Follow

the on-screen instructions for enabling it if it is disabled.

4. Enter the LAN port priorities.

5. Enter the LAN port path costs.

6. Enter the bridge maximum age-time.

7. Enter the bridge hello time interval.

8. Enter the bridge forward delay time if this system is the root bridge.

9. Enter the bridge age time.

Device Bridging: (Device = "DAN")

1) IP (sub)network number None

2) Bridging ENABLED

3) Make Calls for bridge data None

4) IPX Network Number None

5) IPX Spoofing Options

Id of option to change or press <RET> for previous menu? 3

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 266

Commentaires sur ces manuels