Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 592)

100

101

USER’S GUIDE

592 CyberSWITCH

In the above example, the DEST field is the destination MAC address field of the LAN frame.

The SOURCE field is the source MAC address of the LAN frame. Next to the source MAC

address field is the location of that source address. An “L” next to the source address indicates

that this address is “Local” to the CyberSWITCH. That is, it is attached to the Ethernet segment

locally connected to the CyberSWITCH. An “R” next to the source address indicates that this

address is “Remote” to the CyberSWITCH. That is, it is attached to an Ethernet segment that is

connected to a remote ISDN device.

The TYPE field is Ethernet type field of the LAN frame. This hexadecimal field represents the

protocol identifier for an Ethernet formatted frame. For an 802.3 formatted frame, it is the

length of the data unit.

The COUNT field is the number of frames transferred for that destination address, source

address, and Ethernet type combination. The total number of frames is displayed at the bottom

of the screen.

To exit the MAC Address Monitor screen and disable the feature, press <Esc> on the

Administration console keyboard.

br stats

Displays the current system packet statistics. Refer to Bridge Statistics, for a list of available

bridge statistics and their definitions.

br stats clear

Clears the current system packet statistics.

CALL CONTROL COMMANDS

The following commands are used to initiate and disconnect calls to devices.

call device <device name>

Initiates a call to the specified device. The entire device name does not need to be entered; only

enough letters of the name to distinguish it from any other configured device name. For

example, you could enter

call device sm

if there are no other devices whose names begin

with

. The call device command can be used to test the Dial Out capability to a specific

device. This command is available only when the Authentication mode is “On-node Device

Table.” To obtain the device name, enter the Manage Mode and issue the

device

command.

Note that the device name is case sensitive.

MAC Address Monitor

DEST SOURCE TYPE COUNT DEST SOURCE TYPE COUNT

90409A000000 00409A001023-L 3C09 00010 00409A001023 00409A001324-R 3C09 00140

00409A001324 00409A001023-L 3C02 00141 90409A000000 00409A001000-L 3C09 00010

90409A000000 00409A002345-L 8137 00015 00409A002345 00409A003217-R 8137 00045

00409A003217 00409A002345-L 8137 00045

Number of Packets Received 00406

1 2 ... 587 588 589 590 591 592 593 594 595 596 597 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 592

Commentaires sur ces manuels