Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 377)

100

101

Central Site Remote Access Switch 377

ONFIGURING

ALL

ONTROL

Bandwidth Reservation

Note that there are four lines in the default profile: (1,1), (1,2), (1,3), and (1,4). The leading “1”

in the pair of numbers represents the slot number. The second number in the pair represents

the port number. This example shows that there is only one BRI adapter, and it is installed in

slot number one, and has four ports. There is a line for each port number.

4. Press 1 to add a device profile.

5. Enter a user-defined unique name to identify the profile. We will use Central_Site for our

example profile name. The following screen will then be displayed:

6. Press 1 to add a new line. This will assign a line to the profile you are configuring.

7. The screen will show all data lines that were previously configured. Follow the prompts to

enter the slot number and port number of the line you are reserving for this profile.

8. You may continue adding new lines for this profile, or press <RET> to exit this menu sequence.

Notes: Listing or adding a line under a profile doesn’t, by itself, reserve the line for devices

with that profile. Listing the line simply means that devices with that profile are

allowed to use the line. To reserve a line, you must guarantee that the line is listed for a

unique profile only. In other words, no lines are reserved for a profile unless that line

is assigned to that profile AND also unassigned to all other profiles.

Adding a device profile does not affect the default profile. You may want to consider

deleting the lines you are reserving for your profile from the default profile. To delete

the reserved lines from the default profile, press 2 at the Device Profile screen to change

a profile. Follow the on-screen instructions to delete a line from the default profile. This

will reserve the line for a specific device and no one else.

To reference the specific device profile in the device list:

Assigning a specific device profile to a device will give that device usage of the line you configured

in the above section. To assign a specific device profile to a device you need to enter the device

profile information when you are configuring the device’s ISDN information. You may either

configure the device profile information when you are first adding the device, or you may add the

information later. To enter the profile information:

1. Select "3" from the main menu to configure security.

2. Select "3" from the Security Menu to configure device level database information.

3. Select "2" from the Device Level Databases Menu to configure on-node device database entries.

4. If this is a new device, follow the onscreen instructions to add a device. If this is a previously

configured device, select the device Id for the device for which you will add a device profile.

Profile NAME = Central_Site

is currently allowed access to:

id Line id Line

----------------------------------------

No Lines Configured

(1) Add new line, (2) Delete Line or press <RET> for previous menu?

1 2 ... 372 373 374 375 376 377 378 379 380 381 382 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 377

Commentaires sur ces manuels