Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 352)

100

101

USER’S GUIDE

352 CyberSWITCH

USING MANAGE MODE COMMANDS

Currently you cannot configure SNMP using the Manage Mode, but the following command is

available:

snmp

This Manage Mode command displays the current SNMP configuration data. An example

output screen is shown below:

SNMP CONFIGURATION ELEMENTS

SNMP STATUS

You may enable or disable the SNMP feature.

OMMUNITY NAME

A 1 to 20 character case-sensitive string that specifies a Community Name that will be accepted by

the SNMP Agent if it is specified in an incoming Request PDU.

MIB A

CCESS LEVEL

The MIB Access Level associated with a Community Name must be selected from the supplied list.

It dictates the level of access available to the associated Community Name. The following is a chart

of the three possible access levels and their access privileges.

MANAGE> SNMP

The SNMP feature is enabled.

Current SNMP COMMUNITY NAME Configuration:

id MIB ACCESS LEVEL COMMUNITY NAME

--- -------------------------------------------

1 MIB_ADMIN public

2 MIB_USER user

3 MIB_ADMIN test

Current SNMP TRAP RECEIVER List Configuration:

id IP ADDRESS COMMUNITY NAME

----------------------------------------------

1 128.111.001.001 public

2 144.123.111.099 public

3 102.003.003.222 test

The generation of Authentication Failure Traps is disabled.

The generation of ISDN B-Channel Usage Traps is enabled.

The ISDN B-Channel Usage Trap threshold is 5 B-Channels.

Access Level Access Privileges

MIB GUEST get (read) MIB-2 system group only

MIB USER get (read) all MIB-2 and Enterprise MIB objects

MIB ADMIN get (read) all MIB objects and set (write) all MIB objects

that are writable

1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 352

Commentaires sur ces manuels