Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 623)

100

101

Central Site Remote Access Switch 623

YSTEM

OMMANDS

UDP Commands

trace ipxwan [on/off]

Enables or disables the IPXWAN tracing option, which tracks all packets which are received or

sent out using IPXWAN protocol, and places this information in the system log. To display the

log file, issue the

command. This option is initially disabled.

trace lapb [on/off]

Enables or disables the LAPB data link information packet tracing option. This feature displays

up to 15 octets of the packet. To display the log file, issue the

console command. This option

is initially disabled.

trace [on/off]

Enable or disables the call trace information reports. If enabled, you can then view the logged

call trace information by issuing the

command. For details on call trace messages, refer to

the chapter titled Trace Messages.

trace ppp [on/off]

Enables or disables the tracing of incoming and outgoing PPP packets. If enabled, you can view

the trace PPP information by issuing the

command.

trace x25 [on/off]

Enables or disables the X.25 packet tracing option. This feature displays up to 15 octets of the

packet. To display the log file, issue the

console command. This option is initially disabled.

wan fr-ietf trace [on/off] [in/out] [device/fr_accessname_dlci] [prot]

Enables or disables the tracing of incoming and out going frame relay IETF packets. This

feature displays the direction of the packet, the device or PVC name, the line protocol, and up

to 15 octets of the packet. To display the log file, issue the

console command. This option is

initially disabled.

UDP COMMANDS

UDP (User Datagram Protocol) provides a datagram mode of communication for delivery of

packets to a remote or on-node device. When the system’s IP operating mode is enabled, the

following UDP commands are available:

udp conns

Displays the current UDP connection status.

udp stats

Displays the current system UDP statistics. Refer to UDP Statistics for definitions.

USER LEVEL SECURITY COMMANDS

The following console commands are available to provide information on the authentication

servers for user level security. They may be used to diagnose the following problems with:

• connections to an off-node authentication server

• CyberSWITCH configuration

• authentication server user database entries

1 2 ... 618 619 620 621 622 623 624 625 626 627 628 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 623

Commentaires sur ces manuels