Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 404)

100

101

USER’S GUIDE

404 CyberSWITCH

SYSTEM MESSAGES

The CyberSWITCH reports three different types of system messages: informational, warning, and

error messages. These messages are always available on-node via the

command. To send

system message reports to an off-node server, however, you will need to properly configure the

setup. First, you must configure IP Routing, a LAN IP interface and an IP route to the log server.

Then you must enable the System Message (DR) log feature:

• define and configure at least one log device for system messages

• connect the Syslog Server via the LAN port of the CyberSWITCH, and

• select an associated UNIX priority tag (default = 38)

Since multiple systems may log into a shared, central log server, it is crucial that each system Name

be a unique value. This unique NAS (system) Name is used in the format of the message:

An entire chapter is devoted to the listing and descriptions of the message text. Refer to the System

Messages chapter for more information.

UTHENTICATION MESSAGES

CyberSWITCH software now separates the authentication messages from other system messages

and places them in their own log. Like the system messages, these authentication messages are

always available on-node. You may access these messages via the

command. To send system

message reports to an off-node server, however, you will need to properly configure the setup,

similar to the procedure for System Messages: First, configure IP Routing, a LAN IP interface and

an IP route to the log server. Next, enable the Authentication Message (DA) log feature:

• define and configure at least one log device for authentication messages

• connect the Syslog Server via the LAN port of the CyberSWITCH, and

• select an associated UNIX priority tag (default = 38)

Since multiple systems may log into a shared, central log server, it is crucial that each system Name

be a unique value. This unique NAS (system) Name is used in the format of the message:

An entire chapter is devoted to the listing and descriptions of the message text. Refer to the System

Messages chapter for more information.

ALL DETAIL RECORDING

The CyberSWITCH’s Call Detail Recording (CDR) feature tracks WAN connections on a per user

or per device basis. This feature provides you with a way to account for usage of equipment and

attached telephone lines.

CDR consists of a series of reports about an event, sent to either a local log file or an off-node

database. For switched circuit devices, such as ISDN, the primary events are “connect”,

“disconnect” and “reject”. For async terminal connections, they are “term conn”, “term disc”, “term

succ” and “term fail”. A report always refers to the particular entity at the other end of the WAN

connection.

CDR is always active and available on-node via the

log cdr display

command. To send CDR

reports to an off-node server, however, you will need to properly configure the setup. First, you

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 404

Commentaires sur ces manuels