Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 351)

100

101

Central Site Remote Access Switch 351

ONFIGURING

SNMP

Configuring SNMP

1. Enable IP routing if you have not already done so.

2. Select SNMP from the Options menu.

3. Follow the onscreen instructions to enable SNMP. The following SNMP menu will then be

displayed:

4. Enter the Community Name information.

a. Enter a user-defined Community Name. This is a case-sensitive string of octets used to

identify the community to which an SNMP Manager, along with the Agent(s) that it

manages, belongs. It is used to authenticate an SNMP PDU. The string “public” is a widely

used Community Name.

b. Select the access level associated with the Community Name.

5. Enter the SNMP trap information (optional).

a. Configure IP address(es) and Community Name used in SNMP Trap PDUs.

• Enter the IP address of the NMS(s) that should receive the traps. The NMS is a device

that contains SNMP management software. A Network Manager can be any type of

computer that is capable of executing the necessary SNMP management software.

• Select the Community Name.

b. If you want authentication failure traps, follow the onscreen instructions for enabling

them.

c. If you want ISDN B-channel usage traps, follow the onscreen instructions for enabling

them.

d. Set the threshold value for ISDN B-channel usage traps.

6. Optional: change the values of the MIB-2 system group objects.

SNMP Menu:

1) SNMP (Enable/Disable)

2) SNMP Community Name

3) SNMP Trap Information

4) MIB-2 System Group Objects

Select function from above or <RET> for previous menu:

1 2 ... 346 347 348 349 350 351 352 353 354 355 356 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 351

Commentaires sur ces manuels