USER’S GUIDE
58 CyberSWITCH
SYSTEM ADAPTERS
This section describes the following adapters which are supported by Central Site CyberSWITCH
platforms:
•Ethernet
• Basic Rate
•Primary Rate
•Expander
•V.35
• RS232
• Digital Modem
•Encryption
For adapter illustrations, refer to the System Adapters Appendix. For required adapter settings, refer
to the Hardware Installation chapter.
ETHERNET ADAPTERS
ETHERNET-2 ADAPTER
The Ethernet-2 adapter was formerly known as the Ethernet adapter.
The Ethernet-2 provides direct support for two Ethernet (or 802.3) LAN connections. In the
CyberSWITCH, this adapter provides both local and remote bridging of LAN data.
The Ethernet-2 incorporates an Intel i960 RISC processor executing at 33Mhz. When coupled with
the integrated, high-performance Ethernet controllers, the adapter can operate at the maximum
speed of the LAN (10Mbps). This is equivalent to a packet rate of 14,800 packets per second (pps).
The adapter has 2MB of DRAM, which allows it to execute sophisticated filtering and forwarding
functions. The adapter maintains a large table of over 1000 entries for local MAC addresses.
The front of the adapter has two 15-pin AUI connectors. This provides direct connection for 802.3
transceivers, which accommodates 10Base5, 10Base2, or 10BaseT connectivity.
Hardware Characteristics
Processor: i960
Speed: 33Mhz
Ports: 2
Port Type: 15pin AUI
MTBF: 75000hours
MTTR: 0.25hour
E
THERNET-1 ADAPTER
The Ethernet-1 adapter was formerly known as the Ethernet LE adapter.
The Ethernet-1 provides direct support for a single Ethernet (or 802.3) LAN connection. In the
CyberSWITCH, this adapter provides remote bridging of LAN data.
Commentaires sur ces manuels