Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 108)

100

101

USER’S GUIDE

108 CyberSWITCH

Error reading platform type: type was not converted to an int

Error reading platform type: there is no “plat name” field

The diskettes you have are corrupted. Call your distributor or Technical Support for a new set

of diskettes.

5. Follow the on screen prompts for inserting diskettes #2, #3, and #4.

6. If you wish to upgrade the Manager at this time:

a. issue the

quit

command to terminate the system software

b. insert the Manager diskette

c. at the DOS prompt type

C:\ADMIN\UG_ADMIN <return>

d. follow the on screen prompts to complete the Manager Upgrade

8. Reboot to complete the Upgrade process.

Note: Before you configure your CyberSWITCH, issue the

ver

command and check to make sure

that you have selected the correct platform. If you have not selected the correct platform,

you must reinstall your software and select the correct platform during the installation

process.

ANDLING UPGRADE WARNINGS AND ERRORS

During Step 5 of the Upgrade process, checks are made to ensure that the system is in a “normal”

condition before an upgrade. If something abnormal is found, you will be warned of the

abnormality and the upgrade process is halted. In the event that you receive any of the following

error messages, contact Customer Support for assistance.

Possible errors:

Invalid OLD System file.

You can only upgrade from release: n.n.n.

Machine running release: n.n.n.

Could not open old System file.

Cannot run upgrade.

REMOTE UPGRADE

The remote upgrade feature will allow you to upgrade the CyberSWITCH by transferring the

upgrade file and then remotely issuing a

restart

command. To accomplish this, you will need

the rupgrade.bat and the latest autoexec.bat files, available with 7.2 software.

To remotely upgrade the operational software, follow these steps:

1. From the PC/workstation, Telnet to the CyberSWITCH and login as admin.

2. Verify that the system is ready to receive TFTP upgrades:

• Enter MANAGE MODE by typing

manage

<RET> at the system prompt.

•Using the MANAGE MODE command

tftp

, verify that:

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 108

Commentaires sur ces manuels