Enterasys Networks CSX7000 Manuel d'utilisateur Page 299

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 729
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 298
Central Site Remote Access Switch 299
C
ONFIGURING
A
DVANCED
IP R
OUTING
IP Filters
MODIFYING THE FINAL CONDITION FOR A FILTER
To change the final condition for a filter, select Change Default Condition (currently selection (5) on
the Conditions for Filter menu.
APPLYING FILTERS
Once you have defined your forwarding filters, you must apply them to selected points in the IP
routing process. There are three ways to apply filters:
through a Network Interface
globally
on a per-user basis
A
PPLYING FILTERS TO NETWORK INTERFACES
1. Return to the IP Configuration menu (from Options).
2. Select IP Interfaces.
3. Select Change.
4. Select the interface on which the filter is to be applied.
5. Press <RET> until you reach the prompt which asks for Input Filter Name.
6. If you want to apply an Input filter, provide the filter name at the Input Filter prompt. If you do
not want to apply an Input filter, press <RET>.
7. If you want to apply an Output filter, provide the filter name at the Output Filter prompt. If you
do not want to apply an Output filter, press <RET>.
A
PPLYING THE GLOBAL FORWARDING FILTER
1. From the IP Routing menu, select IP Filters.
2. Select Apply Global Forwarding Filter.
3. Provide the global filter name.
A
PPLYING PER-DEVICE FORWARDING FILTERS
1. Return to the Main Menu.
2. Select Security.
3. Select Device Level Databases.
4. Select On-node Device Entries.
5. Select the device to which you want to apply the forwarding filter.
Vue de la page 298
1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 728 729

Commentaires sur ces manuels

Pas de commentaire