Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 422)

100

101

USER’S GUIDE

422 CyberSWITCH

3. To correct the problem, try the following:

Error mapping adapter # into Host memory map

Type mismatch of configured & installed adapter #

a. Terminate the system software:

Type:

quit

Check the configuration for the Serial Adapter resource. The configuration must match the

resource type and hardware settings. For details, refer to the Hardware Overview and the

Hardware Installation chapter.

Turn the CyberSWITCH off, then on

Press: <Power Off><Power On>

Continue with step 1 in the section Verifying WAN Line Availability (and reestablish the ad-

ministration session, if necessary).

b. If this fails to correct this problem, check to see if the Serial adapter is properly installed in

the system.

Serial dedicated down: Slot #, Port #

a. Check that the serial cable is properly connected to the Serial Adapter resource.

Continue with step 1 in the section Verifying WAN Line Availability (and reestablish the ad-

ministration session, if necessary).

b. If this fails to correct this problem, check to see that the Serial cable is properly connected

to the network termination equipment.

c. If the above actions fail to correct this problem, check that the serial adapter is configured

to match the network requirements.

4. If this fails to correct the problem, the Serial adapter may be faulty. If you have a spare Serial

adapter resource available, replace the faulty Serial adapter with the spare. Contact Customer

Support.

CAUTION:

If at any time you need to remove the system cover, be sure to turn the system OFF and

unplug it first.

LAN CONNECTION OPERATIONAL?

To verify the operation of the LAN connection, the Ethernet LAN adapter resource must already

be operational:

1. Connect the CyberSWITCH to a properly terminated Ethernet LAN. Note that an external

MAU (and AUI cable if needed) is required for this connection.

2. Transmit a test packet onto the Ethernet LAN. At the administration console type:

lan test

1 2 ... 417 418 419 420 421 422 423 424 425 426 427 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 422

Commentaires sur ces manuels