Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 545)

100

101

Central Site Remote Access Switch 545

RACE

ESSAGES

Call Trace Messages

CALL TRACE MESSAGES

A feature of the CyberSWITCH console is the ability to save and display a record of the high level

ISDN calls between the system and the local telephone switch. If calls are unable to be completed,

this is normally the first area to look.

Call Trace puts messages into the Report log that can be read by using the

command. Call Trace

is enabled by using the

trace on

command, and disabled by

trace off

The following is a description of the possible fields included in a Call Trace Message:

1. The <Call Id> field in the message can be used to keep track of messages for the same phone

call. This is useful when a system is making more than one call at a time.

2. The In-Disconnect and In-Information messages have a location field. This identifies where the

message originated.

The following chart provides a list of locations that may appear in Call Trace messages:

3. The In-Disconnect messages have a cause field. This is the value (in hex) that was in the

message. It explains why either a call was disconnected or why a call attempt was not able to

be completed. There are also parameters (such as <signal value>, <progress value>), that are

not described here. These values represent messages reported from the switch. We have

attempted to interpret their significance in the error message text itself.

Refer to the Cause Codes table, for a complete listing of cause codes.

When the call trace option is enabled, the system may report messages such as:

(I) 13:55:46.98 #1067: Out - CALL RQST CallId=0x8000 Rate=64 Slot=1 Port=1

Chans=0x2 TN=181 Ces=0 ConnId=0

(I) 13:55:46.98 #1063: In - CALL RQST ACK CallId=0x8000 Slot=1 Port=1

Ces=1ConnId=0

(I) 13:55:47.43 #1063: In - PROCEEDING CallId=0x8000 Slot=1 Port=1 Chans=0x1

Ces=1 ConnId=0

(I) 13:55:47.60 #1063: In - CONNECT Call_id=0x8000 Slot=1 Port=1 Chans=0x0

Ces=1 ConnId=0

(I) 13:55:54.16 #4D11: LAN Port 1 is now in the FORWARDING state

Location Causes

Value Meaning

0 remote device

1 private local network

2 public local network

3 transit network

4 private remote network

5 public remote network

7 international network

FF local CyberSWITCH system

1 2 ... 540 541 542 543 544 545 546 547 548 549 550 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 545

Commentaires sur ces manuels