Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 106)

100

101

USER’S GUIDE

106 CyberSWITCH

machine being installed. If you cannot determine the platform being used, temporarily

configure the platform type as “CSX Series,” then call Technical Support to help you identify

the platform type.

If one of the following messages is displayed:

Couldn’t open the file C:\SYSTEM\PLATFORM.NEI

Error reading C:\SYSTEM\PLATFORM.NEI

Error reading platform type: there was no “n” in the string

Error reading platform type: type value is too large

Error reading platform type: type was not converted to an int

Error reading platform type: there is no “plat name” field

the diskettes you have are corrupted. Call your distributor or Technical Support for a new set

of diskettes.

4. The system will copy the files from Disk 1 onto the system disk. Wait for the following message

to appear, then remove the system software diskette #1.

5. Follow the on-screen installation instructions. The software will provide prompts when you

are required to insert the next disk. After installation is complete, the following message will

be displayed:

6. Remove the diskette from the diskette drive and reboot the CyberSWITCH.

7. The log-in screen will now be displayed. It is necessary to enter a log-in and a password. The

log-in controls which class of commands the user can access. Each access level (guest or

administrator) is protected by a unique log-in password. This allows managers to assign

different responsibility levels to their system administrators. Enter the following login:

admin

A prompt will appear for an initial password. This user defined password must be a 3 to 16

nonblank character string. Passwords are upper and lowercase sensitive. Enter a password

now.

8. The CyberSWITCH program should now be operating.

Note: Before you begin configuring your system, issue the

ver

command to make sure that you

have selected the correct platform. If you have not selected the correct platform, reinstall

your software and select the correct platform during the installation process.

Remove disk 1 and insert disk 2

Press the enter key when ready to continue installation

System Installation Completed

Release n.n.n

Issue n

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 106

Commentaires sur ces manuels