Enterasys Networks CSX7000 Manuel d'utilisateur Page 396

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 729
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 395
USER’S GUIDE
396 CyberSWITCH
PPP CONFIGURATION
CONFIGURING PPP
Note: A thorough understanding of PPP protocol is required before you attempt to change the
PPP configuration. By changing the PPP configuration, you are changing the PPP protocol
negotiation parameters. These parameters only need to be changed when you are
attempting to interoperate with devices that do not provide a standard PPP
implementation. Changing these parameters can result in PPP option negotiation failure
and the inability to communicate with remote devices. The default parameters are
adequate for most sites.
U
SING CFGEDIT
1. Select PPP Options from the options menu.
2. Change the Global PPP options.
a. Change the max terminate value.
b. Change the max configure value.
c. Change the max failure value.
d. Change the restart timer value.
3. Change the LCP configuration options.
a. Change the LCP protocol field compression (PFC).
b. Change the LCP address control field compression (ACFC).
4. Change the IPCP configuration options.
a. Change the IPCP IP address negotiation initiation.
5. Change the Link Failure Detection Options.
a. Enable or disable the link failure detection feature.
b. Set the echo frequency.
c. Configure the maximum attempts.
PPP CONFIGURATION ELEMENTS
MAX TERMINATE
The number of Terminate-Request packets sent without receiving a Terminate-Ack before
assuming that the peer is unable to respond.
M
AX CONFIGURE
The number of Configure-Request packets sent without receiving a valid Configure-Ack,
Configure-Nak or Configure-Reject before assuming that the peer is unable to respond.
M
AX FAILURE
The number of Configure-Nak packets sent without sending a Configure-Ack before assuming that
configuration is not converging. Any additional Configure-Nak packets are converted to
Configure-Reject packets.
Vue de la page 395
1 2 ... 391 392 393 394 395 396 397 398 399 400 401 ... 728 729

Commentaires sur ces manuels

Pas de commentaire