Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 171)

100

101

Central Site Remote Access Switch 171

ONFIGURING

ECURITY

EVEL

User Level Security

AUTHENTICATION PROCESS WITH USER LEVEL SECURITY

Making a Telnet Connection

In order to access user level security, you must first establish a Telnet connection to the

CyberSWITCH. Depending upon your application, the prompts or procedures may vary; however,

the information you need to provide is as follows:

• host name: provide the IP address of the CyberSWITCH

• port #: provide the port number of the authentication server that is connected to the system

•emulation: VT100

Note that the system must be connected to the authentication server on the local LAN. Use the

default value of the port number for the authentication server (RADIUS 7001, TACACS 7000, ACE

7003), unless you have changed this value in CFGEDIT. The emulation default is VT100. No change

is required.

Once the Telnet connection is established, you will be prompted with a login screen.

Responding to LOGIN Prompts

The login display may vary, depending upon your database location, and the prompt order you

have configured. Responses to prompts may vary, depending upon whether or not you have a

security token card, and the type of security token card you have. The ACE and TACACS servers

support the SecurID card; the RADIUS server does not.

If using the RADIUS server for user level authentication, enter your user Id and password onto

your remote machine.

If using the ACE or TACACS server for user level authentication, procedure depends upon type of

security token card.

With the SecurID PINPAD card, you enter your password onto the SecurID card, which in turn

generates a dynamic password or passcode.

With the SecurID non-PINPAD card, you enter your password onto your remote machine. You

then check your SecurID card for its current dynamic password or passcode.

The difference in card function is that the PINPAD card generates a dynamic password or passcode

based upon your password entry; the non-PINPAD card generates a new dynamic password based

upon an elapsed period of time.

Refer to the section below that summarizes the login procedure required for the type of server you

are using.

RADIUS:

does not use security token card

1. Enter login Id.

2. Enter password.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 171

Commentaires sur ces manuels