Enterasys-networks ROAMABOUT RBT-1602 Manuel d'utilisateur télécharger pdf (Page 31)

Overview of Connecting Cables to the Access Point

RoamAbout Antenna Site Preparation and Installation Guide 2-5

TosetuptheRoamAboutAP,performthefollowingsteps:

1. Removetheplasticcapfromtheradioconnector(s)andconnectittothepigtailcable.

2. ConnecttheAPpigtailtotheantennaasappropriateforyourcableconfiguration.Referto

ConnectingtheAntennaCablesonpage 3‐34.

3. ConnecttheEthernetcablefrom

theAPtotheAPconnectoronthepoweradapter.

4. RecordtheAP’sMACaddress(locatedonthesideoftheunit).

5. Recordtheradiocards’MACaddresses.

6. IfyouareusingPoE,connecttheEthernetcabletoyourPoEswitch.

7. IfyourswitchdoesnotsupportPoE,youwillneedto

provideaninlinepowerinjector,oruse

thelocalpoweroptionontheRBT‐4102.

Table 2-4 RBT-1602 Installation Components

# Component

8 RBT-1602 Access Point

9 RBT-1602 Access Point mounting bracket (dual/redundant 10/100 port)

10 Connection to switch (dual/redundant 10/100 port)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 91 92

Pas de commentaire

Enterasys-networks ROAMABOUT RBT-1602 Manuel d'utilisateur Page 31