Enterasys-networks 6H308-24 Manuel d'utilisateur télécharger pdf (Page 50)

Setting the Mode Switches

B-2 Mode Switch Bank Settings and Options

B.2 SETTING THE MODE SWITCHES

Figure B-1 shows the location of the mode switches and the switch settings for normal operation.

These switches are set at the factory and rarely need to be changed.

Switch definitions and positions are as follows:

• Switches 1 through 4 – For Enterasys Networks use only.

• Switch 5 – COM Port Autobaud. The default (OFF) position enables Autobaud sensing on the

COM port for Local Management sessions. Changing the switch to the ON position disables

Autobaud sensing and sets the COM port to 9600 baud for Local Management sessions.

Figure B-1 Mode Switch Location

CAUTION: Read the appropriate sections to be fully aware of the consequences when

changing switch settings.

Only qualified personnel should change switch settings.

3195_34

Memory Board

MODE SWITCH

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Pas de commentaire

Enterasys-networks 6H308-24 Manuel d'utilisateur Page 50