Enterasys-networks X-Pedition 2000 Manuel d'utilisateur télécharger pdf (Page 30)

Hardware Overview

14 Enterasys X-Pedition 2000 Getting Started Guide

LEDs

The 100BASE-FX expansion module uses the following LEDs.

1000BASE-SX Expansion Module

The 1000BASE-SX expansion module contains two independent Gigabit (1000-Mbps) Ethernet

ports. The ports connect to multimode-mode fiber (MMF) cables. Figure 4 shows the front panel of

the 1000BASE-SX expansion module.

Figure 4. Front panel of 1000BASE-SX expansion module

Table 8. 100BASE-FX expansion module LEDs

LED Description

Lnk Each port has two LEDs located to the left of the connector. The

green Lnk LED indicates the link status. When this LED is lit, the

port hardware is detecting that a cable is plugged into the port and the

port has established communication with the device at the other end.

Act The amber Act LED flashes each time the port’s transceiver sends or

receives packets.

Tx Link

1000BASE-SXG2M-GSXA1-02

Gigabit port Gigabit port

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 85 86

Pas de commentaire

Enterasys-networks X-Pedition 2000 Manuel d'utilisateur Page 30