Enterasys-networks SNS-TAG-LPA Manuel d'utilisateur télécharger pdf (Page 30)

Configure the Appliance

3-2 Configuration

6. Selectfromthefollowing,highlightOK,andpressEnter.

• staticIP:usesastaticIPaddresstoconfigureEthernet

• DCHP:usesaDHCPservertoconfigureEthernet

• loopback:usedtosetupaloopbackconnection(modemornonet)

TheENTERIPADDRESSFOR“yourhostname”screenappears.

7. EntertheapplianceIPaddress,highlightOK,andpressEnter.

TheENTERNETMASKFORLOCALNETWORKscreenappears.

8. Entertheappliancenetmask,highlightOK,andpressEnter.

TheENTERGATEWAYADDRESSscreenappears.

9. Enterthegatewayaddressforyournetwork,highlightOK,andpressEnter.

TheUSEANAMESERVER

screenappears.

10. Ifyouwillbeaccessinganameserver,highlightYesandpressEnter.

TheSELECTNAMESERVERscreenappears.

11. EntertheprimarynameserverIPaddress,highlightOK,andpressEnter.

TheCONFIRMNETWORKSETUPscreenappears.

12. Verifyyourinformation,highlightACCEPT,andpressEnter.PressEnteragainin

thesecond

verificationscreentoaccept.

Basicnetworkconfigurationiscomplete.TheENTERMANAGEMENTSERVERIPscreen

appears.

13. EntertheIPaddressofthemanagementserver,highlightOK,andpressEnter.

TheHWCLOCKscreenappears.

14. Selectthehardwareclocksetting,andthenthetimezoneconfiguration.HighlightOKand

pressEnter.

The

ENABLESNMPDAEMONscreenappears.

15. TomonitortheapplianceusinganSNMPnodemanager,highlightYESandpressEnter.

TheENTERSYSTEMCONTACTandtheENTERSYSTEMLOCATIONscreensappear.

16. Enterthesystemcontactandthesystemlocation.HighlightOKandpressEnterforeach

screen.

TheREADCOMMUNITYSTRING,WRITE COMMUNITY

STRING,SNMPTRAP

DESTINATION,andtheTRAPCOMMUNITYscreensappear.

17. Enterthereadcommunitystring,writecommunity string,SNMPtrapdestination,andthe

trapcommunitystring.HighlightOKandpressEnterforeachscreen.

18. Configurationiscomplete.Reboottheappliance.

Note: Static IP is recommended; however, you must evaluate your network environment.

Note: If you do not have a gateway on your network, leave the field blank and press Enter.

1 2 ... 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Enterasys-networks SNS-TAG-LPA Manuel d'utilisateur Page 30