Enterasys-networks Security Router X-PeditionTM Manuel d'utilisateur télécharger pdf (Page 64)

Utilizing the Command Line Interface

2-28 Managing the XSR

For more command details, refer to the XSR CLI Reference Guide.

Uploading the Configuration/Crash Report

An upload copies the XSR startup-configuration file (partial) to a system in a CLI script format

using TFTP. You can later retrieve the file with TFTP.

To perform the task correctly, the TFTP server must be running on a remote device. You then enter

the

copy startup-config tftp: <tftp IP addr>/filename command in EXEC mode to copy

the file to the server. A successful upload produces the following sample output:

XSR#copy startup-config tftp:

Address of remote host [0.0.0.0]: 10.10.10.10

Destination file name [startup-config]:

Copy 'startup-config' from Flash to server

as 'startup-config'(y/n) ? y

Upload to server done

File size: 976 bytes

You can also upload the crash report via TFTP using the same procedure as the one used to

upload the configuration file.

Refer to the XSR CLI Reference Guide for more command details.

Full-config Backup

Alternately, you can backup and restore the full configuration file suite including encoded VPN

users, usernames, passwords, certificates, and SNMPv3 data files (

user.dat, cert.dat, and

private-config) to a remote site with a full configuration backup. This method employs a modified

backup/restore algorithm to copy the data encoded by the master encryption key to the

temporary

full-config file then restores the data in startup-config and other data files. Be

aware that the same master encryption key is required for both backup (on the source XSR) and

restore (on the destination XSR) operations. Information in the

full-config file is stored either as

ASCII text (

startup-config data) or encrypted binary text (data files).

The

full-config backup/restore option is also available using SNMP. Refer to “Full

Configuration Backup/Restore” on page 2-43 for details.

Creating Alternate Configuration Files

The XSR permits you to create multiple configurations, a useful option if you want to quickly

select one of two configuration files stored in

flash: or cflash:, for example: startup-config

and

startup-configB. The file named startup-config is used by the autoboot process. You can

use any file name for the alternate configuration.

To make an alternate configuration file available, rename

startup-config to startup-configA

(for example), and startup-configB to startup-config., using the rename command. Then

issue the

reload command to use the new configuration.

Note: If you have inadvertently added errors to the CLI script file, the restoration of startup-

config will be stopped at the error line. So, any commands after that line in startup-config are

not executed.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 465 466

Commentaires sur ces manuels

Pas de commentaire

Enterasys-networks Security Router X-PeditionTM Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Enterasys-networks Security Router X-PeditionTM