Enterasys-networks XSR-3020 Manuel d'utilisateur télécharger pdf (Page 79)

Bootrom Monitor Mode Commands

XSR Getting Started Guide 3-35

• Bootrom is valid.

• The software image in Flash is valid.

Bootrom Monitor Mode Commands

Bootrom monitor mode offers special user access when the XSR lacks valid software or runs

abnormally. Enter the mode by pressing the key combination (

CTRL-C) during the first five

seconds of initialization. After you access the mode, list command groups by typing

h to show the

text below:

b Boot

f Files

n Network

s Status

t Time and Date

D For Development Only

All the commands in each group can be listed by entering the command group letter. The main

menu provides the following functions:

• Reboot warm or cold

• Update Bootrom

• File system-related commands for the Flash ROM file system

• Modify network parameters

• Various status/show commands

• Version number

• Hardware information

• Display crash info

• Display or change date and time on real-time clock if present

• Commands for development use only

This command initiates a cold reboot.

This command initiates a warm reboot.

This command changes the Bootrom password. The default password is blank. You are prompted

to enter a password by the following script:

Caution: Upon accessing Bootrom monitor mode, if you do not provide the password (if

configured earlier with the bp command) when prompted or enter an incorrect password five

times, the XSR will delete your configuration and reinstitute factory default settings. This function

is similar to pressing the reset button on the XSR-1800 Series routers.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 109 110

Pas de commentaire

Enterasys-networks XSR-3020 Manuel d'utilisateur Page 79