Enterasys-networks VHSIM2-A6DP Manuel d'utilisateur Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 118
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
LEC Table Screen
Local Management 3-39
Port (Read-Only)
Displays the application port number this has LEC has been dynamically assigned.
Index (Read-Only)
Displays the Index of the LEC.
LEC ID (Read-Only)
This value is dynamically assigned by the LES to uniquely identify this LEC.
Ver (Read-Only)
Displays the version of LAN Emulation (LANE) that the LEC is currently using.
ELAN ID (Read-Only)
This value is dynamically assigned by the LES to uniquely identify this ELAN.
ELAN Name (Read-Only)
Displays the name assigned to the Emulated LAN (ELAN) by the user in the LEC Administration
screen (Section 3.13) or by the LECS.
LEC State (Read-Only)
Displays the current state of the LEC. The LEC goes through a series of initialization phases,
which may result in this field displaying different states as the initialization process proceeds. The
possible states are as follows:
Initial State - While in Initial State the LEC receives two types of configuration parameters:
From the User: LECS ATM Address, ELAN Name, MTU Size, and LAN Type.
From the ATM Switch: The ATM Address of the switch.
LECS Connect - During the LECS Connect phase, the LEC establishes a Configuration
Direct VCC with the LECS.
Configure - The Configure phase is where the LEC discovers the LES before going on to
the join phase.
NOTE: In most cases, the initialization process occurs very rapidly, and the following
initialization states, with the exception of “Operational”, may not display.
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 117 118

Commentaires sur ces manuels

Pas de commentaire