Enterasys-networks Enterasys Gold Distributed Forwarding Engine 4H428 Manuel d'utilisateur télécharger pdf (Page 83)

Memory Locations and Replacement Procedures

Matrix DFE-Gold Series Modules Hardware Installation Guide B-9

Removing the DRAM SIMM from 4H4203-72

ToremovetheexistingDRAMSIMM,proceedasfollows:

1. LocatetheDRAMSIMMconnectoronthemainPCboard.ReferbacktoFigure B‐6 .

2. PushtheconnectorarmsawayfromtheDRAMSIMM,asshowninFigure B‐11,

enoughtoreleasetheDRAMSIMMfromtheconnector.

Figure B-10 Installing the DRAM SIMM on 4H4282-49

or 4H4283-49

1 Connector arms 3 Connector

2 DRAM SIMM memory module 4 Alignment notches (2)

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 89 90

Pas de commentaire

Enterasys-networks Enterasys Gold Distributed Forwarding Engine 4H428 Manuel d'utilisateur Page 83