Enterasys Networks CSX7000 Manuel d'utilisateur Page 590

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 729
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 589
USER’S GUIDE
590 CyberSWITCH
atalk port stats [clear]
This command will display or clear current AppleTalk port statistics. Refer to AppleTalk Port
Statistics, for a list of available atalk port statistics and their definitions.
atalk route
This command will display AppleTalk static route information. A sample output screen is
shown below:
The fields in this display are defined as follows:
network range
The remote AppleTalk network range reachable through this static route. Note that if there is
only a single network number instead of a range, that number will appear twice under the
network range field.
distance
The number of AppleTalk routers that are traversed in order to reach the destination
AppleTalk network.
state
The state of the route. Possible values are:
good - This indicates that this is a valid route.
bad - This indicates that the indicated router has not been heard from in a while; it has timed
out. Therefore, it is no longer a valid route.
next hop
The AppleTalk address of the next hop device that provides access to the destination
AppleTalk network. If the distance = 0, and the next hop = 0.0, this indicates that there is no
router between the port and the destination. If the distance 0, and the next hop = 0.0, this
indicates that the static route is over an UnNumbered port.
zones valid
For every route there is a set of associated zones. When a device has learned the complete list
of zones for that route, the zones valid field will display TRUE.
atalk stats
AppleTalk statistics are comprised of six su/jointfilesconvert/77628/bgroups of statistics. The
atalk stats
command
displays all six groups of the current system AppleTalk statistics. Refer to AppleTalk Routing
Statistics, for a list of available AppleTalk statistics and their definitions.
Enter one of the following commands to display a su/jointfilesconvert/77628/bgroup of the AppleTalk statistics:
atalk stats ddp
Displays the AppleTalk Data Delivery Protocol (DDP) statistics.
atalk stats echo
Displays the AppleTalk Echo Protocol (AEP) statistics.
network range distance state next hop zones valid
------------- -------- ------ -------- -----------
225 - 226 0 good 0.0 TRUE
Vue de la page 589
1 2 ... 585 586 587 588 589 590 591 592 593 594 595 ... 728 729

Commentaires sur ces manuels

Pas de commentaire