Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 529)

100

101

Central Site Remote Access Switch 529

YSTEM

ESSAGES

System Message Summary

[SNMP] Authentication failure, improper access rights

There are two possible causes for this message:

• The SNMP Agent received a SetRequest PDU that contained a Community Name with an MIB

access level of MIB GUEST or MIB USER. The MIB access level must be MIB ADMIN to per-

form a SetRequest. The request was discarded.

• The SNMP Agent received a PDU that contained a Community Name with an MIB access level

of MIB GUEST and an object Id that cannot be accessed with an MIB GUEST access level. The

request was discarded.

[SNMP] Authentication failure, unknown community name

The SNMP Agent received a request PDU whose community name is not configured in the

Community Names Table. The request was discarded.

[SNMP] SNMP initialization failure - unable to allocate necessary memory

The SNMP feature was unable to initialize because it could not obtain the necessary memory. The

SNMP feature is disabled and no SNMP request will be processed. Contact your Distributor or

Customer Support.

[SNMP] SNMP initialization failure - unable to open UDP port

The SNMP feature was unable to initialize because it could not obtain the necessary UDP port. The

SNMP feature is disabled and no SNMP request will be processed. Check the configuration, and

then contact your Distributor or Customer Support.

[SNMP] SNMP initialized successfully

The SNMP Agent has been successfully initialized and is fully operational.

[SNMP] Unable to obtain an SNMP Trap queue entry buffer

The SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could not

obtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.

[SNMP] Unable to obtain an SNMP Trap queue header

The SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could not

obtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.

SPID FSM got unidentifiable INFO msg - Slot=<slot #> Port=<port #> Ces=<communication endpoint

suffix>

An unexpected information message was received from the network on the indicated line. If you

are having trouble establishing calls on this line, the problem should be reported to your phone

company.

SSB: Can’t read RTC prior to i960 POSTs

The Real Time Clock became inaccessible before invoking the i960 POSTs. The RTC is used to guard

against infinite loops while waiting for the i960 to run its POST tests. The boot process should

continue; however, make note of the error message in the event of a future problem.

SSB: Couldn’t read RTC during i960 POSTs

The Real Time Clock became inaccessible during the running of the i960 POSTs. The RTC is used

to guard against infinite loops while waiting for the i960 to run its POST tests. The boot process

should continue; however, make note of the error message in the event of a future problem.

1 2 ... 524 525 526 527 528 529 530 531 532 533 534 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 529

Commentaires sur ces manuels