Enterasys Networks CSX7000 Manuel d'utilisateur Page 510

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 729
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 509
USER’S GUIDE
510 CyberSWITCH
[IP] Invalid Peer IP Address <IP address>, WAN IP Stream Closed
A PPP or RFC 1294 (IP Host) connection came up, and the IP address of the peer device (pre-
configured or negotiated) belongs to a WAN (RLAN) Interface. If the IP address is preconfigured,
try changing the peers IP address (at the peer device and possibly on the device entry for the peer)
that belongs to one of the WAN, WAN (Direct Host), or WAN (UnNumbered) interfaces. If the IP
address is negotiated, try changing the IP address pool, or make sure that you really do want to use
a WAN (RLAN) Interface.
[IP] IP host is initialized successfully
This message is posted when the system IP Host feature has initialized successfully.
[IP] IP router is initialized successfully
This message is posted when the system IP Router feature has initialized successfully.
[IP] Network initialized successfully on ddd.ddd.ddd.ddd
This message is posted when the numbered interface is successfully initialized on the indicated IP
address.
[IP] Network Interface on LAN port <port #> already exists
There is another network interface that is configured for the LAN port indicated, and it was already
initialized successfully. This means that there are multiple network interfaces configured for the
same LAN port. You should correct the system configuration.
[IP] Network Interface on LAN port <port #> not initialized
The network interface for the LAN port indicated was not initialized because there is no Ethernet
resource configured, or the Ethernet resource that is configured does not have the corresponding
port. You should correct the system configuration.
[IP] Route (<IP address #1>) not added, invalid next hop (<IP address #2>)
The static route entry indicated by the <IP address #1> was not added in the routing table because
the next hop indicated by the <IP address #2> is not located on any network directly connected to
the configured network interface.
IPSec - Duplicate SA, Final Dest Addr: nn.nn.nn.nn SPI nn.nn.nn.nn
A Security Association with the same SPI and Final Destination Address already exists. If there is
no SPI parameter listed, the Security Association table has been filled.
IPSec Security Associations initialized successfully
[IP] WAN (Direct Host) Interface for LAN port <port #> already exists
There is another WAN (Direct Host) type interface that is configured for the LAN port indicated,
and it was already initialized successfully. This means that there are multiple WAN (Direct Host)
type interfaces configured for the same LAN port. Use CFGEDIT to specify primary or secondary
interface.
[IP] WAN (Direct Host) Interface <WAN interface name>, invalid associated LAN interface <LAN
interface name>
The WAN (Direct Host) type interface could not come up; the associated LAN network interface,
specified by configuration, was not found. Use CFGEDIT to delete old WAN (Direct Host)
interface. Check for associated LAN interface, and add if necessary. Then add back the WAN
(Direct Host) interface.
Vue de la page 509
1 2 ... 505 506 507 508 509 510 511 512 513 514 515 ... 728 729

Commentaires sur ces manuels

Pas de commentaire