Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 507)

100

101

Central Site Remote Access Switch 507

YSTEM

ESSAGES

System Message Summary

IePvcStatus: Received Status Report for unknown PVC # <dlci index>

The indicated unknown DLCI was indicated in a STATUS message received from the network. This

DLCI number is entered in the “unknown DLCI” list and can be displayed via the FR LMI system

console command.

Incoming call from <Device Name>, Slot=<slot #>, Port=<port #>, Chan=<channel #> Rejected by BW

Reservation

A bandwidth reservation message. Indicates that a call has come in from the indicated device, on a

line that is not in this device’s profile. The call will be disconnected. If you see this message often,

check the remote device’s configuration to prevent wasted calls.

Initial TDM Clock Master: <slot#, line#>

The external line indicated has been selected as the master clock source.

Initializing...

Displays the current state of the system (initialization).

Installing File Set into Flash Memory

The file set, received via X-Modem, has successfully passed its verification tests and is now being

written into the Flash File System.

Insufficient space for buffer pool creation

There is not enough system memory to proceed with the creation of the requested size buffer pool.

Contact your Distributor or Customer Support.

Interrupt fault on WAN Adapter in Slot <slot #>

The interrupt jumper for the WAN Adapter in the specified slot is missing or misplaced.

Invalid caller number: <caller’s sites name> - <caller’s number>

The incoming call security feature is enabled and a call was received from an unknown remote site,

therefore the call was disconnected. If the call was from a valid remote site, the device list must be

updated to include the remote site's phone number.

Invalid Call_ID in HOST_CALL_CONNECTED

Invalid Call_ID in HOST_CALL_DISCONNECT

An error has been detected in the R2 or RBS signaling procedure, which typically results in a failed

call. The error was due to unrecognizable or incorrect information. If problem persists, contact your

Distributor or Customer Support.

Invalid CLLM received on Access <access index>

An invalid CLLM message was received on the indicated Frame Relay Access. The message had

either missing elements or invalid contents.

Invalid LAN Adapter identifier

The system has detected invalid LAN adapter hardware. Check for proper LAN adapter

configuration and hardware installation.

Invalid Password <password> given

The remote Combinet sent a password that did not match any device table entries. This most likely

is due to a configuration error. Check the configuration, and change the password.

1 2 ... 502 503 504 505 506 507 508 509 510 511 512 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 507

Commentaires sur ces manuels