Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 496)

100

101

USER’S GUIDE

496 CyberSWITCH

[DHCP-P] Ignoring offers from DHCP server x.x.x.x; the server MUST be on a primary LAN interface, or

IP addresses will not be obtained

In order for the DHCP proxy client to successfully obtain IP addresses for multiple interfaces, the

DHCP server must reside on a primary LAN interface. If it does not, this message is written to the

Report Log, and no IP addresses will be obtained from the server and placed into the IP Address

Pool. To correct, use CFGEDIT to change the DHCP server’s interface from a secondary interface

into a primary interface for that LAN port.

[DHCP-P] Invalid DHCP Server LAN port encountered in configuration; NIF entry not activated

This message appears when the DHCP Proxy Client encounters an invalid configuration setting for

an IP network interface’s LAN port on which the DHCP server is to be reached. This will result in

no IP addresses being obtained for the network interface in question. Contact your Distributor or

Customer Support.

[DHCP-P] Proxy Client disabled

This message indicates that the DHCP Proxy Client has been successfully disabled. This message

will appear after the DHCP Proxy Client has been disabled from Manage Mode.

[DHCP-P] Proxy Client enabled

This message will appear whenever the DHCP Proxy Client has been successfully enabled. This

could be during system initialization (if configuration values have enabled it), or after the DHCP

Proxy Client has been enabled from Manage Mode.

[DHCP-P] Proxy Client initialization failed

This message indicates that the DHCP Proxy Client did not initialize successfully. The DHCP Proxy

Client will not be operational. Contact your Distributor or Customer Support.

[DHCP-P] UDP port (67) closed

The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPS UDP

port (port 67). If the DHCP Relay Agent is enabled, the BOOTPS port must remain open. If this is

the case, the DHCP Proxy Client will not close the UDP port.

[DHCP-P] UDP port (67) opened

The DHCP Proxy Client is being enabled and it must open the BOOTPS UDP port (port 67). This

may occur during system initialization, or after the DHCP Proxy Client has been enabled from

Manage Mode. If the DHCP Relay Agent is also enabled, it may not be necessary for the Proxy

Client to open this UDP port.

[DHCP-P] UDP port (68) closed

The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPC UDP

port (port 68).

[DHCP-P] UDP port (68) opened

The DHCP Proxy Client is being enabled and it must open the BOOTPC UDP port (port 68). This

may occur during system initialization, or after the DHCP Proxy Client has been enabled from

Manage Mode.

[DHCP-R] Failed to allocate memory for transmit buffer pool

The system was unable to allocate memory for the DHCP Relay Agent’s transmit buffer pool

during initialization. The Relay Agent will not become operational. Contact your Distributor or

Customer Support.

1 2 ... 491 492 493 494 495 496 497 498 499 500 501 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 496

Commentaires sur ces manuels