Enterasys Networks CSX7000 Manuel d'utilisateur Page 454

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 729
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 453
USER’S GUIDE
454 CyberSWITCH
a. Verify that the AppleTalk LAN port that Local Mac is attached to is in up state by entering
the following console command:
atalk port
b. If the command shows the port is not in up state, wait for a couple of minutes and repeat
this step.
c. Check to see if the LAN connection of the port is operational. If the LAN connection is not
operational, then correct the problem.
d. If you are using Classic Networking, verify that EtherTalk is used on the Local Mac by
opening the Network control panel as shown below:
If EtherTalk is selected, and no zones are displayed, then contact your Distributor or Cus-
tomer Support.
e. If you are using Open Transport, verify that Local Mac has chosen a proper AppleTalk
address within the valid network range (this would be 10-11 for the example network) by
opening the AppleTalk control panel as shown below:
Vue de la page 453
1 2 ... 449 450 451 452 453 454 455 456 457 458 459 ... 728 729

Commentaires sur ces manuels

Pas de commentaire