Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 318)

100

101

USER’S GUIDE

318 CyberSWITCH

SECURITY ASSOCIATIONS

The steps to configure security associations are merely listed here. For more detailed information,

refer to Configuring Encryption.

CONFIGURING SECURITY ASSOCIATIONS

USING CFGEDIT

1. Select Security Associations from the IP Routing menu, and then select Add.

2. Select packet direction. You may choose outgoing (packets from trusted subnet to remote site),

incoming (packets to trusted local subnet from a remote site), or both.

3. Enter the final destination IP address and subnet mask.

4. Enter the Source IP address and subnet mask.

5. Enter the destination gateway/IP address.

6. Enter an Initial Value (IV) length.

7. Enter Authentication Header information.

8. Enter the shared secret key.

9. Enter SPI information.

Configuration for IP Router “Chloe”

System Information:

System Name = Chloe

System Password =pets

Security Level = Device Level (On-node

Device Database, PAP security)

Bridging disabled

IP enabled (router mode)

I/F = LAN (192.168.1.168); LAN port 1

I/F = WAN explicit (192.168.10.168)

DHCP related:

max addrs to obtain=10

num addrs to pre-fetch=5

LAN port to reach server=1

DHCP configuration:

Relay Agent disabled.

Proxy Client enabled.

Device = “Summer”

ISDN Line Protocol = PPP

PAP Password = “dogs”

IP Address = (none)

IP Routing = enabled

IP callable = disabled

Bridging = disabled

1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 318

Commentaires sur ces manuels