Enterasys Networks CSX7000 Manuel d'utilisateur télécharger pdf (Page 206)

100

101

USER’S GUIDE

206 CyberSWITCH

USER LEVEL AUTHENTICATION DATABASE LOCATION CONFIGURATION ELEMENTS

DATABASE LOCATION

The database location for user level security. Choices are: RADIUS Server, TACACS Server, or ACE

Server.

ATABASE TELNET PORT NUMBER

You must also specify the Telnet port number to be used for authentication with the selected server.

This port number is a unique number that identifies the server. For remote authentication, users

will need to Telnet into this specially configured port. Any Telnet sessions coming through this port

must be authenticated via the specified Authentication Server before other actions are allowed.

Note: For user level security, the CyberSWITCH’s default Telnet port number is 7000, not the

normal default (23). The Telnet port number used for remote administration sessions is the

23. If you wish, you can reconfigure the port numbers so that these values are switched (i.e.,

the Telnet administration session uses a higher number, user level security uses the normal

default of 23), but you cannot use 23 for both.

USER LEVEL AUTHENTICATION DATABASE LOCATION BACKGROUND INFORMATION

An off-node, central database allows a network with more than one CyberSWITCH to access one

database for user authentication. The CyberSWITCH will access the off-node database to locate

authentication information on a user that is attempting to establish a connection. If the user’s

information matches what is configured in the database, then the connection is allowed.

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 728 729

Commentaires sur ces manuels

Pas de commentaire

Enterasys Networks CSX7000 Manuel d'utilisateur Page 206

Commentaires sur ces manuels