Enterasys Networks VH-8TX1MF Manuel d'utilisateur télécharger pdf (Page 31)

9033718-01 Installation 17

Mounting the Switch in a Rack

The switch ships with two (2) multi-position mounting ears and four (4)

mounting screws.

Figure 2.1 shows the orientation of the mounting ears for attaching the

ears to the switch for a rack mount application. Mount the switch with the

front panel facing forward. Do the following:

1. Mount one of the ears to the switch using two (2) of the supplied

screws. Repeat this step for the other side of the switch.

2. Slide the switch into the rack and align the holes in the rack mounting

ears with the holes in the rack rails.

3. Insert and tighten appropriate rack-mounting screws (not provided).

Figure 2-1. Mounting the Switch in a Rack

NOTE: The mounting screws are used to attach the

mounting ears to the switch. Once the ears are attached

to the switch, you will need to provide appropriate

screws to mount the switch in a rack.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Pas de commentaire

Enterasys Networks VH-8TX1MF Manuel d'utilisateur Page 31