Enterasys Networks VH-8TX1MF Manuel d'utilisateur télécharger pdf (Page 17)

9033718-01 Product Overview 3

Front Panel

Figure 1-1 shows the front panel of the Enterasys Networks Vertical

Horizon VH-8TX1UM/VH-8TX1MF. Table 1-1 defines the VH-8TX1UM/

VH-8TX1MF front-panel components.

Figure 1-1. VH-8TX1MF Front Panel

Table 1-1. Front Panel Components

* The 100Base-FX port is a single-mode fiber (SMF) port on the VH-8TX1UM and a

multi-mode fiber (MMF) port on the VH-8TX1MF.

Name Function

PWR LED On indicates power is supplied to the switch. Off

indicates no power is supplied to the switch.

Link LED’s Green indicates that there is a 100 Mbps link, and the

port is enabled. Flashing green indicates that there is a

100 Mbps link, and port activity. Amber indicates that

there is a 10 Mbps link, and the port is enabled.

Flashing amber indicates that there is a 10 Mbps link,

and port activity. Off indicates that there is no link.

FDX LED’s Green indicates that the switch is operating in full-

duplex mode. Off indicates that the switch is operating

in half-duplex mode.

TX/FX Button When using Port 8, use this toggle switch to select the

RJ-45 connector or fiber connector. Note that every

time you change the Port 8 connector, you must also

reset the switch.

10Base-T/100Base-TX

RJ-45 Ports (Ports 1 - 8)

Copper ports using RJ-45 port connectors. All the ports

are wired MDI-X.

100Base-FXPort (Port 8)* A fiber port using SC connectors for uplink. When

using the fiber port, use the TX/FX button to select the

fiber connector.

Port Status Indicators

10/100M RJ-45 Ports 100M SC Ports

TX/FX Button

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Pas de commentaire

Enterasys Networks VH-8TX1MF Manuel d'utilisateur Page 17