Enterasys Networks Smart 2200 Manuel d'utilisateur télécharger pdf (Page 46)

Using the RESET Button

4-8 Troubleshooting

4.3 USING THE RESET BUTTON

The RESET button shown in Figure 4-2 resets and re-initializes the 2H258-17R.

Figure 4-2 RESET Button

To reset the 2H258-17R processor, press and release the RESET button. The 2H258-17R goes

through a reset process for approximately 60 seconds. Additional downtime may result as the

device reenters the network.

CAUTION: Pressing the RESET button resets the device, and all current switching

being performed by the device is halted. A network downtime of up to two minutes will

result from this action.

NOTE: It is not recommended to press the RESET button while the device is already in

reset mode. If so, the device will enter an extended diagnostic procedure, which is

unnecessary for normal operation. This extended diagnostic procedure takes much

longer than a minute.

3068-10

RESET Button

2H258-17R

COM

PWR

CPU

RX TX

FAST ETHERNET WORKGROUP SWITCH

123456 8910 1516

11 12 14137

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 61 62

Pas de commentaire

Enterasys Networks Smart 2200 Manuel d'utilisateur Page 46