Enterasys Networks Smart 2200 Manuel d'utilisateur télécharger pdf (Page 31)

Installing the Device

Installation 3-5

Installation

Rack mounting the 2H258-17R involves the following:

• Attaching the strain-relief bracket

• Rack mounting the 2H258-17R (attaching the mounting brackets and fastening the device to the

rack)

Attaching the Strain-Relief Bracket

Attach the strain-relief bracket to the 2H258-17R as follows:

1. Locate the strain-relief bracket and four 8-32 x 5/16-inch pan-head screws in the rackmount kit.

2. Place the 2H258-17R upside down (as shown in Figure 3-2) on a clean flat surface. Then attach

the strain-relief bracket to the bottom of the 2H258-17R using the four 8-32 x 5/16-inch

pan-head screws.

Figure 3-2 Attaching the Strain-Relief Bracket

CAUTION: Do not attempt to attach the strain-relief bracket with screws other than the

8-32 x 5/16-inch screws included with the 2H258-17R. Use of longer screws may

damage the unit.

COM

Strain-Relief

Bracket

Strain-Relief

Bracket Screws

3068-03

2H258-17R

PWR

CPU

RESET

RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX

123456 8910 151611 12 14137

FAST ETHERNET WORKGROUP SWITCH

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 61 62

Pas de commentaire

Enterasys Networks Smart 2200 Manuel d'utilisateur Page 31