10-Gigabit Ethernet Transceiver (XFP) Specifications
Enterasys G-Series Hardware Installation Guide A-9
MGBIC-08 Specifications (1000BASE-ELX)
MGBIC-LC09 Specifications (1000BASE-LX)
10-Gigabit Ethernet Transceiver (XFP) Specifications
The10‐GigabitSmallFormFactorPluggable(XFP)interfaceportslotsontheG3modulessupport
variousoptional10‐GigabitEthernet(10GbE)standardtypefiber‐optictransceivers.Table A‐22
providestheinput/outputspecificationsforeachsupportedXFPversionasspecifiedintheIEEE
802.3ae‐2002standard.
Table A-18 MGBIC-08 Optical Specifications
Item
Transmit Power (minimum) -0 dBm, min. +2 dBm, typical +5 dBm, max.
Receive Sensitivity -24 dBm, min. -26 dBm, typical
Maximum Input Power -3 dBm
Link Power Budget
1
(Full Duplex Only)
1. The maximum drive distance (up to 80 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment.
The Link Power Budget must not exceed those specified in this table. The MGBIC-08 input power must not
exceed -3 dBm. Otherwise, saturation could occur.
23 dB 28 dB, typical
Table A-19 MGBIC-08 Operating Range
Item 1550 nm Range
9 or 10 µm SMF N/A 80,000 Meters
Table A-20 MGBIC-LC09 Optical Specifications
Item 62.5 µm MMF 50 µm MMF 10 µm SMF
Transmit Power (minimum) -11.5 dBm -11.5 dBm -9.5 dBm
Receive Sensitivity -20 dBm -20 dBm -20 dBm
Link Power Budget 8.5 dBm 8.5 dBm 10.5 dBm
Table A-21 MGBIC-LC09 Operating Range
Item Modal Bandwidth @ 1300 nm Range
62.5 µm MMF 500 MHz/km 2-550 Meters
50 µm MMF 400 MHz/km 2-550 Meters
50 µm MMF 500 MHz/km 2-550 Meters
10 µm SMF N/A 2-10,000 Meters
Commentaires sur ces manuels