Enterasys Networks RBT-8200 Manuel d'utilisateur télécharger pdf (Page 19)

Physical Specifications

RBT-8200 Wireless Switch Installation Guide 1-5

Physical Specifications

ThephysicalspecificationsfortheRBT‐8200 WirelessSwitcharelistedinTable 1‐3.

Environmental Requirements

EnsurethattheenvironmentalrequirementsarewithintherangesdescribedinTable 1‐4.

Table 1-3 Physical Specifications

Parameter Approximate Specification

Width 430 mm (16.93 in.)

Height 87.5 mm (3.445 in.)

Depth 672 mm (26.457 in.)

Table 1-4 Environmental Specifications

Parameter Description

Operating Temperature 10°C to 35°C (50°F to 95°F) with the maximum rate of change not to

exceed 10°C per hour

Non-Operating Temperature 40°C to 70°C (104°F to 158°F)

Altitude -60 meters (-197 feet) below sea level to 4000 meters (13,123 feet)

above sea level

Non-Operating humidity 90%, non-condensing @ 35°C (95°F)

Acoustic noise Sound Pressure: 55 dBA (Rackmount) in an idle state at typical office

ambient temperature. (23 +/- degrees C)

Sound Power: 7.0 BA in an idle state at typical office ambient

temperature. (23 +/- 2 degrees C)

Operating Shock No errors with a half sine wave shock of 2G (with 11 millisecond

duration).

Package Shock Operational after a 24 -inch free fall, although cosmetic damage may

be present (chassis weight 40-80 lbs)

ESD +/-15kV per Intel Environmental test specification

System Cooling

Requirement in BTU/Hr

1826 BTU/hour

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Pas de commentaire

Enterasys Networks RBT-8200 Manuel d'utilisateur Page 19